Index: linux-2.6-pleb/MAINTAINERS =================================================================== --- linux-2.6-pleb.orig/MAINTAINERS 2004-11-24 11:37:18.793526170 +1100 +++ linux-2.6-pleb/MAINTAINERS 2004-11-24 11:40:35.617960552 +1100 @@ -287,6 +287,12 @@ M: linux@treblig.org S: Maintained +ARM/PLEB SUPPORT +P: Peter Chubb +M: pleb@gelato.unsw.edu.au +W: http://www.disy.cse.unsw.edu.au/Hardware/PLEB +S: Maintained + ARM/PT DIGITAL BOARD PORT P: Stefan Eletzhofer M: stefan.eletzhofer@eletztrick.de Index: linux-2.6-pleb/drivers/net/smc91x.h =================================================================== --- linux-2.6-pleb.orig/drivers/net/smc91x.h 2004-11-24 11:37:18.850166293 +1100 +++ linux-2.6-pleb/drivers/net/smc91x.h 2004-11-25 09:19:03.244812601 +1100 @@ -92,6 +92,25 @@ } while (0) #define set_irq_type(irq, type) +#elif defined(CONFIG_SA1100_PLEB) +/* We can only do 16-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) inb((a) + (r)) +#define SMC_insb(a, r, p, l) insb((a) + (r), p, (l)) +#define SMC_inw(a, r) inw((a) + (r)) +#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) +#define SMC_outb(v, a, r) outb(v, (a) + (r)) +#define SMC_outsb(a, r, p, l) outsb((a) + (r), p, (l)) +#define SMC_outw(v, a, r) outw(v, (a) + (r)) +#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) + +#define set_irq_type(irq, type) do {} while (0) + #elif defined(CONFIG_SA1100_ASSABET) #include Index: linux-2.6-pleb/arch/arm/mach-sa1100/pleb.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6-pleb/arch/arm/mach-sa1100/pleb.c 2004-11-24 11:43:10.369513432 +1100 @@ -0,0 +1,154 @@ +/* + * linux/arch/arm/mach-sa1100/pleb.c + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "generic.h" + + +/* + * Ethernet IRQ mappings + */ + +#define PLEB_ETH0_P (0x20000300) /* Ethernet 0 in PCMCIA0 IO */ +#define PLEB_ETH0_V (0xf6000300) + +#define GPIO_ETH0_IRQ GPIO_GPIO(21) +#define GPIO_ETH0_EN GPIO_GPIO(26) + +#define IRQ_GPIO_ETH0_IRQ IRQ_GPIO21 + +static struct resource smc91x_resources[] = { + [0] = { + .start = PLEB_ETH0_P, + .end = PLEB_ETH0_P | 0x03ffffff, + .flags = IORESOURCE_MEM, + }, +#if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */ + [1] = { + .start = IRQ_GPIO_ETH0_IRQ, + .end = IRQ_GPIO_ETH0_IRQ, + .flags = IORESOURCE_IRQ, + }, +#endif +}; + + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device *devices[] __initdata = { + &smc91x_device, +}; + + +/* + * Pleb's memory map + * has flash memory (typically 4 or 8 meg) selected by + * the two SA1100 lowest chip select outputs. + */ +static struct resource pleb_flash_resources[] = { + [0] = { + .start = SA1100_CS0_PHYS, + .end = SA1100_CS0_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SA1100_CS1_PHYS, + .end = SA1100_CS1_PHYS + SZ_8M - 1, + .flags = IORESOURCE_MEM, + } +}; + + +static struct mtd_partition pleb_partitions[] = { + { + .name = "blob", + .offset = 0, + .size = 0x00020000, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 0x000e0000, + }, { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 0x00300000, + } +}; + + +static struct flash_platform_data pleb_flash_data = { + .map_name = "cfi_probe", + .parts = pleb_partitions, + .nr_parts = ARRAY_SIZE(pleb_partitions), +}; + + +static void __init pleb_init(void) +{ + sa11x0_set_flash_data(&pleb_flash_data, pleb_flash_resources, + ARRAY_SIZE(pleb_flash_resources)); + + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + + +static void __init pleb_map_io(void) +{ + sa1100_map_io(); + + sa1100_register_uart(0, 3); + sa1100_register_uart(1, 1); + + GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD); + GPDR |= GPIO_UART_TXD; + GPDR &= ~GPIO_UART_RXD; + PPAR |= PPAR_UPR; + + /* + * Fix expansion memory timing for network card + */ + MECR = ((2<<10) | (2<<5) | (2<<0)); + + /* + * Enable the SMC ethernet controller + */ + GPDR |= GPIO_ETH0_EN; /* set to output */ + GPCR = GPIO_ETH0_EN; /* clear MCLK (enable smc) */ + + GPDR &= ~GPIO_ETH0_IRQ; + + set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING); +} + +MACHINE_START(PLEB, "PLEB") + BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) + MAPIO(pleb_map_io) + INITIRQ(sa1100_init_irq) + .timer = &sa1100_timer, + .init_machine = pleb_init, +MACHINE_END Index: linux-2.6-pleb/arch/arm/mach-sa1100/Kconfig =================================================================== --- linux-2.6-pleb.orig/arch/arm/mach-sa1100/Kconfig 2004-11-24 11:37:18.721261185 +1100 +++ linux-2.6-pleb/arch/arm/mach-sa1100/Kconfig 2004-11-24 11:46:24.208616995 +1100 @@ -109,6 +109,14 @@ (also known as the LART). See for information on the LART. +config SA1100_PLEB + bool "PLEB" + help + Say Y here if you are using version 1 of the Portable Linux + Embedded Board (also known as PLEB). + See + for more information. + config SA1100_SHANNON bool "Shannon" help Index: linux-2.6-pleb/arch/arm/mach-sa1100/Makefile =================================================================== --- linux-2.6-pleb.orig/arch/arm/mach-sa1100/Makefile 2004-11-24 11:37:18.625558908 +1100 +++ linux-2.6-pleb/arch/arm/mach-sa1100/Makefile 2004-11-24 11:48:21.729066867 +1100 @@ -35,6 +35,8 @@ obj-$(CONFIG_SA1100_LART) += lart.o led-$(CONFIG_SA1100_LART) += leds-lart.o +obj-$(CONFIG_SA1100_PLEB) += pleb.o + obj-$(CONFIG_SA1100_SHANNON) += shannon.o obj-$(CONFIG_SA1100_SIMPAD) += simpad.o Index: linux-2.6-pleb/arch/arm/Kconfig =================================================================== --- linux-2.6-pleb.orig/arch/arm/Kconfig 2004-11-24 11:37:18.749581247 +1100 +++ linux-2.6-pleb/arch/arm/Kconfig 2004-11-24 11:49:58.528999481 +1100 @@ -393,7 +393,7 @@ config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && SA1100_LART + depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB) default y config CPU_FREQ_SA1110 Index: linux-2.6-pleb/arch/arm/configs/pleb_defconfig =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6-pleb/arch/arm/configs/pleb_defconfig 2004-11-25 09:14:09.795703795 +1100 @@ -0,0 +1,699 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.10-rc2 +# Wed Nov 24 15:12:32 2004 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_HOTPLUG is not set +# CONFIG_KOBJECT_UEVENT is not set +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_SHMEM is not set +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_TINY_SHMEM=y + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +CONFIG_ARCH_SA1100=y +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set + +# +# SA11x0 Implementations +# +# CONFIG_SA1100_ASSABET is not set +# CONFIG_SA1100_CERF is not set +# CONFIG_SA1100_COLLIE is not set +# CONFIG_SA1100_H3100 is not set +# CONFIG_SA1100_H3600 is not set +# CONFIG_SA1100_H3800 is not set +# CONFIG_SA1100_BADGE4 is not set +# CONFIG_SA1100_JORNADA720 is not set +# CONFIG_SA1100_HACKKIT is not set +# CONFIG_SA1100_LART is not set +CONFIG_SA1100_PLEB=y +# CONFIG_SA1100_SHANNON is not set +# CONFIG_SA1100_SIMPAD is not set +# CONFIG_SA1100_SSP is not set +# CONFIG_SA1100_USB is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_SA1100=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_CACHE_V4WB=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WB=y +CONFIG_CPU_MINICACHE=y + +# +# Processor Features +# + +# +# General setup +# +CONFIG_DISCONTIGMEM=y +CONFIG_ISA=y +# CONFIG_ZBOOT_ROM is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_XIP_KERNEL is not set +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEBUG is not set +# CONFIG_CPU_FREQ_PROC_INTF is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_SA1100=y + +# +# At least one math emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_PM is not set +# CONFIG_PREEMPT is not set +# CONFIG_ARTHUR is not set +CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M" +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_SA1100=y +# CONFIG_MTD_EDB7312 is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +CONFIG_SMC91X=y +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Userland interfaces +# + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +# CONFIG_SERIO is not set + +# +# Input Device Drivers +# + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SA1100=y +CONFIG_SERIAL_SA1100_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +# CONFIG_EXPORTFS is not set +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# Misc devices +# + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set